■ Setting up the Nokia Image Frame
Warning! To avoid damage to the SIM card, do not install, move or
remove the SIM card if the power supply is connected to an AC wall
outlet.
1. If you want to be able to receive images over MMS, you have to insert a SIM
card into the Nokia Image Frame.
1. With the display of the Nokia Image Frame facing you, detach the cover on
the back of the Nokia Image Frame by pushing it down forward.
2. Insert the SIM card to the SIM card holder so that the contact surface of
the SIM card is up and the bevelled corner of the card is on the right and
facing away from you.
3. Put the cover back on the Nokia Image Frame.
Copyright
©
2004 Nokia. All rights reserved.
16
2. Connect the lead from the
charger to the socket at the back
of the Nokia Image Frame (1).
3. Connect the charger to an AC
wall socket.
4. Set the Nokia Image Frame on
the table with the control keys
on the top. If most of your
images are in the upright
position, you can turn the Nokia
Image Frame upright so that the
control keys are on the right side
of the display.
Note: All radio transmitting devices send signals that may cause
interference in different electronic devices (PC, television, etc.). To
avoid interference, place the Image Frame far enough from other
electronic devices.
You can turn the table support at the back to change the position angle of the
Nokia Image Frame (2).